Tag: Reloading Blog

6.5x47mm Build: Uintah Precision UPR-10 Hybrid AR

Originally Posted on utlimatereloader.com I’ve been curious about 6.5x47mm Lapua (the cartridge) for quite a while! This handloaders-oriented cartridge is similar to other cartridges like 6.5 Creedmoor, but offers some advantages that I’ll explore in this article, and future articles. I’ve also wanted to try Triebel Reamers (from Germany), and to build a barrel for […]

TESTED: 4D Reamer Rentals (Counterbore Lathe Job)

Also posted on Ultimate Reloader! Have you ever had a one-off job that involved a special tool? How about when that tool can take months to get? That’s where tool rental RULES. And for gunsmithing tools (namely reamers) there’s a solution for that: it’s 4D Reamer Rentals at 4drentals.com! In this story, I used 4D […]

True Bore Alignment System In-Depth

Also published on our sister site: Ultimate Reloader. If you’re working as a gunsmith on rifle barrels, actions, or related parts, chances are that you spend a lot of time with critical alignment. Every time you go to machine these parts you’ll need precise alignment with your lathe spindle. And these alignment tasks can eat […]

224 Valkyrie Remington 700 Build P5: Custom Thread Protector

Originally posted on our sister website: Ultimate Reloader. A threaded muzzle is great, but if you aren’t using a muzzle brake or suppressor, you’ll need something to protect the (fragile) threads! That’s where a thread protector comes in handy. One of the best ways to make a thread protector is with a cut-down section of […]

224 Valkyrie Remington 700 Build P4: Muzzle Threading and Barrel Install

Originally posted on our sister website: Ultimate Reloader. Here’s my philosophy: why not have a threaded muzzle? If you want to use a muzzle brake or a suppressor, you’re all set! If you don’t use a muzzle device, you put a thread protector on, and you’re good to go. So now that we’ve completed the […]

224 Valkyrie Remington 700 Build P3: Chambering and Machining

Originally published on our sister website: Ultimate Reloader. Sometimes you have to do a lot of “prep work” to get to the “fun work”. Well, after building out our build-sheet, and preparing and aligning the barrel, we’re now to the fun part of this build! That’s right, it’s time to start machining the tenon, and […]

224 Valkyrie Remington 700 Build P2: Barrel Prep and Alignment In the Lathe

Originally published on our sister website, Ultimate Reloader. How you secure your barrel in your lathe, and the attention to detail aligning the barrel’s bore to the lathe spindle axis will both have a big effect on the outcome of your barreling work. In this post, we’ll continue our 224 Valkyrie Remington 700 bolt-action rifle […]

224 Valkyrie Remington 700 Build P1: Planning the Build

Originally published on our sister website, Ultimate Reloader. I’ve always wanted to build a Remington 700 custom bolt-action rifle, and now is the time! As a part of the lager 224 Valkyrie project (two rifle builds, reloading, ballistics, …) this smaller collection of videos and articles will outline a complete Remington 700 build- from start […]