Tag: Kinetic Research Group

224 Valkyrie Remington 700 Build P7: AICS Magazine Conversion

Originally published on our sister website: Ultimate Reloader. When you go “off the script” (like building a 224 Valkyrie bolt-action rifle) you can expect some challenges. One such challenge with this kind of build is getting a reliable magazine configuration setup. A lot of guys have spent a lot of hours tinkering with magazines, springs, […]

Originally published on our sister website: Ultimate Reloader. All of the hard work I’ve put into this 224 Valkyrie Remington 700 build is about to come together, literally! With a complete barreled action assembly, it’s time to install our trigger, and then mate the stock and barreled action together. I can hardly wait to take […]

224 Valkyrie Remington 700 Build P5: Custom Thread Protector

Originally posted on our sister website: Ultimate Reloader. A threaded muzzle is great, but if you aren’t using a muzzle brake or suppressor, you’ll need something to protect the (fragile) threads! That’s where a thread protector comes in handy. One of the best ways to make a thread protector is with a cut-down section of […]

224 Valkyrie Remington 700 Build P4: Muzzle Threading and Barrel Install

Originally posted on our sister website: Ultimate Reloader. Here’s my philosophy: why not have a threaded muzzle? If you want to use a muzzle brake or a suppressor, you’re all set! If you don’t use a muzzle device, you put a thread protector on, and you’re good to go. So now that we’ve completed the […]

224 Valkyrie Remington 700 Build P3: Chambering and Machining

Originally published on our sister website: Ultimate Reloader. Sometimes you have to do a lot of “prep work” to get to the “fun work”. Well, after building out our build-sheet, and preparing and aligning the barrel, we’re now to the fun part of this build! That’s right, it’s time to start machining the tenon, and […]

224 Valkyrie Remington 700 Build P2: Barrel Prep and Alignment In the Lathe

Originally published on our sister website, Ultimate Reloader. How you secure your barrel in your lathe, and the attention to detail aligning the barrel’s bore to the lathe spindle axis will both have a big effect on the outcome of your barreling work. In this post, we’ll continue our 224 Valkyrie Remington 700 bolt-action rifle […]

224 Valkyrie Remington 700 Build P1: Planning the Build

Originally published on our sister website, Ultimate Reloader. I’ve always wanted to build a Remington 700 custom bolt-action rifle, and now is the time! As a part of the lager 224 Valkyrie project (two rifle builds, reloading, ballistics, …) this smaller collection of videos and articles will outline a complete Remington 700 build- from start […]

Subscribe to Updates!